VIRTUALBOX GNS3 SOFTWARE IN WINDOWS

Virtualbox Gns3 Software In Windows

If you configure the GNS3 VM as Bridged in the Virtual Network Editor program, you will see that your host machine has received an address from the IP address block.To test the network connection between the GNS3 VM and the host, open the CMD command prompt and check that the connection is OK by using the ping command.Importing the GNS3 VM not only to VMware Workstation is complete, but you also need to enable it on the simulator program.Open the GNS3 program and click on File / Preferences.First, click on the GNS3 VM option and then select the вЂњEnable the GNS3 VMвЂќ option from the settings in the right section and click the OK button after checking the virtual server name you imported in the VM Name section.You can also change the port number of the virtual server here and set the GNS3 VM to be turned off when you close the GNS3 program.When you activate the relevant option while the GNS3 Server is running, you can see that the virtual server has started actively in the Servers Summary section.After enabling the GNS3 VM, you need to add a new Router IOS image on the server and test it. In this window, you can check the server, Qemu, and Ubuntu versions and check that the virtualization environment is the VMware platform.Also, in the IP part, you can see the IP address of the virtual server received by the NAT adapter. If your hostвЂ™s disk type is NVMe or SSD, click the Import button to install in the default location.As soon as you click the Import button, the installation process of the GNS3 server to the location you specified will start as follows.At this step, if the VMware hardware version of the GNS3 VM virtual machine is an older version, upgrade the hardware version to the latest version of Workstation Pro and then run the virtual machine.The main screen of the GNS3 Server is as below image. These are VirtualBox, VMware Workstation, and VMware ESXi.In this article, since we will make an installation with VMware software in Windows 10, click the Download button under the VMware Workstation option and download the OVA file to your computer.After downloading the archived virtual machine file with the zip extension to your computer, extract it to the folder and then open VMware Pro and click File / Open.Go to the location of the file you extracted to the folder and select the GNS3 VM.ova file and click Open.If you want to import the OVA virtual server file to an external disk, click the Browse button and select the relevant location and continue. After installing this software and completing the GNS3 VM requirements, you can follow the steps below in order.To download the current version of the GNS3 VM, visit the official website of GNS3 and click the Free Download button as in the image below.Click the Download VM for GNS3 link in the For Optimal Performance section.When the Download window opens, you will see 3 options.

You can add 4 Serial Interfaces to the Router by selecting PA-4T+ in Slot 1.To ensure that the IOS image does not use 100% of your hostвЂ™s processor, the Idle-PC value must be calculated. Slot 0 includes the FastEthernet interface by default. If you set too little or too much RAM, the Router may not work properly.In the Network Adapters window, you can specify the network interfaces you want to use on the Router. If you have the same IOS you added earlier in this step, change the name of the device because there will be a conflict.First of all, use the default value so that the router can work on your host smoothly. In this window, the Local Computer option is selected by default, but since you will run the IOS image on the virtual server, you need to continue by selecting the вЂњRun this IOS router on the GNS3 VMвЂќ option.In the IOS Image window, navigate to the location of the images you have downloaded to your computer by clicking the Browse button.Select the IOS of the Router you want to add and run and click the Open button.In this step, the IOS image will be uploaded to the GNS3 Server.After uploading the IOS image, click the Next button and proceed the other configuration steps.In the Name and Platform window, configure the name and platform of the IOS you added and click Next.

Next, open the VMware programвЂ™s Virtual Network Editor tool and configure the VMnet0 adapter as Bridged.If you get a version error after enabling the GNS3 Server option on the simulator program after making the necessary settings, remember that both software must have the same version. Please manually configure it via the Networking menu.If you get this error, open the GNS3 server its settings and click on the Network Adapter hardware, select the Custom option from the network types listed on the right, and select VMnet0. Then, after assigning IP addresses from the same IP block to the serial interfaces, test the network connection between them with the ping command.Eth0 is not configured.